Windster RA-7642SS Specifications

Please read and save this guide through before using your range hoodStore the guide away in a safe place so that you will know where it iswhen you wan

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLYGROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIANIN ACCORDANCE WITH ALL APPLICABLE

H. InstallationH. Installation9a. Mounting Range Hood To Cabinet1. Position the hood in place so that :2. Adjust the hood so the front is flush with t

10b. Wall Mount Installationa. Decide the location and measure the length ofventing pipe from the hood to the outside. (Fig.12)b. The less transition,

11Apply with eight (3/16" x 3/8" ) screws (included) to fix thetwo hood-mounting brackets (included) to the back ofthe hood. (Fig.16 )Mark t

c. Install Accessory12RA-33/RA-34 Series RA-35 SeriesFig.211. Refer to Fig. 21 Slide the baffle filter into the hood.Push the baffle filter up ward.Sl

I. Replace the LED LightI. Replace the LED Light13Before replacing LED light ensure the unit is switched off, when you want tochange the LED light, pl

2. After using the machine, wipes the machine by neutral detergent inorder to keep it clean and maintain the appearance with brightnessand sanitation.

L. Use and CareRange hood should be turn on either before or the same time when cookingbegins. After cooking, range hood should be kept on for about 3

16M. Parts layout diagramsM. Parts layout diagramsMODEL :RA-3330CRA-3336C5678910113412RA-3330C RA-3336C1212-11.2.3.4.5.6.Duct cover-Mounting bracketDu

17MODEL :RA-3430BRA-3436BRA-3442BRA-3448B1.2.3.4.5.6.7.Duct cover-Mounting bracketDuct cover (Optional)Hood-Mounting bracketRubber standHood casingLED

Table of ContentsImportant Safety Instructions -----------------------------------------Safety Notes -------------------------------------------------

18MODEL :RA-3530BRA-3536BRA-3542BRA-3548B123547689101.2.3.4.5.6.Duct cover (Optional)Duct coverHood casingLED lightControl boardProcessor board-Mounti

19N. Circuit DiagramsN. Circuit DiagramsFig.23 Details the internal electrical circuit of this range hood unit.Any faults with this unit should only b

WALLHOODWALLHOODPleasereadand savethis guide throughbefore using yourrange hoodStoretheguideawayinasafeplacesothatyouwillknowwhereitiswhenyouwant tore

Model:RA-3330:W29-3/4 xD22 xH6RA-3336:W35-3/4 xD22 xH6""""""21Q. DiagramsQ. Diagrams15”29-3/4”(30”)22”35-3/4”(36”)22”15”

22RA-3436BRA-3430BRA-3448BRA-3442BModel : RA-3430:W29-3/4 xD22 xH9RA-3436:W35-3/4 xD22 xH9RA-3442:W41-3/4 xD22 xH9RA-3448:W47-3/4 xD22 xH9""

23RA-3542BRA-3530B RA-3536BRA-3548BModel : : W 29-3/4 x D x H:W35-3/4 xD2 xH:W41-3/4 xD2 xH:W47-3/4 xD2 xH"""""""&q

What Is Not Covered By These Warranties:1) Conditions and damages resulting from a ny of the following:? Improper installation, delivery, or maint ena

Defective Products:All produc ts will be inspected, tested, and carefully packed by the manufacturerbefore shipping to customers. Products that are da

2102 N. Seaman Ave.,S. El Monte, CA 91733TEL:(626)350-1015(626)350-5215FAX:(626)350-1254© 2006-2008 Windster Hoods, Inc.Specifications subject to chan

Read and Save These InstructionsCAUTION- To reduce risk of fire and to properly exhaust air, make sureto properly exhaust air. Be sure to duct air out

WARNING- To reduce the risk of injury in the event of a range top greasefire, observe the following:A- with a close- fitting lid, cookie sheet,or meta

1. All electrical work must be done in accordance with local and/or nationalelectrical code as applicable for safety. This product must be groundedif

This style of range hood must be vented via ducting to the outside of thehouse. Follow general rules when ducting the hood: Use correct size ofducting

1. Remove the top electricalknockout, you may plan tobring power to the rangehood either through thecabinet or through the wall(Fig.1)2. Insert a scre

1. If you want to move the electric range to make room for working on the cabinetturn off the 220 volt power for the electric range at the service ent

c. Screw the four 1" wood screws (formounting the hood) into the exactcenter of the arrow and into the keyholemounting slots marked on the cabine